Hydac – Oil Separation In Aqueous Systems

HYDAC’s new range of coalescing oil separators enables you to considerably improve the oil separation in your aqueous systems.

This technology is much more compact than traditional systems such as plate phase separators and up to 10 times more efficient.

The increase in performance is due to the active merging of finely dispersed oil droplets in the coalescing filter element.


PLF1C coalescing separator system

The PLF1C coalescing separator is the efficient alternative to gravitational oil separators. Its simple and compact design makes it ideally suited for immediate integration into industrial part washers. Coalescing oil separation and gravitational oil separation techniques are combined in a single housing.

– Cost-effective removal of oil from aqueous media
– Less installation space required compared to gravitational oil separators
– Coalescing element is protected via pre-filtration
– Extended service life of the aqueous cleaning fluid used
– It is not necessary to steady the washing bath for oil removal
– Compliance with environmental protection and disposal regulations


OLSW-30 coalescing separator unit

The Oil Separator from Water OLSW-30 removes free foreign oil from aqueous (cleaning) fluids according to the coalescing principle.
Small oil droplets accumulate on the fibres of the eleven OilRheo coalescing elements. The small droplets then unite to form larger oil drops at the fibre nodes.
The oil drops rise up the outside of the OilRheo elements due to the difference in density. The separated oil can be drained by opening valve.

– Cost-effective removal of oil from aqueous media
– Protection of the OilRheo elements via pre-filtration
– Extended service life of the aqueous cleaning fluid used
– It is not necessary to steady the washing bath for oil removal
– Compliance with environmental protection and disposal regulations


OLSW-100 coalescing separator unit

The OiL Separator from Water OLSW-100 removes free foreign oil from aqueous (cleaning) fluids. This is made possible by a combination of coalescing oil separators and gravitational oil separators which are integrated into a single housing (PLF1C). The coalescing element consists of many coalescing layers which are stacked on top of each other.

– Cost-effective removal of oil from aqueous media
– Coalescing element is protected via pre-filtration
– Extended service life of the aqueous cleaning fluid used
– It is not necessary to steady the washing bath for oil removal
– Compliance with environmental protection and disposal regulations


For any questions or queries please do not hesitate to contact our dedicated sales team.

2020-10-12T08:15:24+00:00October 12th, 2020|